• +86-18922133492
  • info@esscollege.com
  • China

What is the most common type of EV charger?

What is the most common type of EV charger? Class 1 and 2 connectors The most common connector is the SAE J1772 EV plug. All electric vehicles in Canada and the United States can use this plug to charge, even Tesla vehicles with adapters. The J1772 connector is only available for Level 1 and Level 2 charging. Class 3 connector…

What are the packaging limits for small lithium batteries or batteries transported by land or ship?

What are the packaging limits for small lithium batteries or batteries transported by land or ship? The battery must be placed inside the inner package to prevent damage, short circuit and movement in the outer package. Battery terminals are of special importance. They should not touch other batteries/or any other conductive content packaging. The battery must be placed in a…

How to connect the rack installation?

How to connect the rack installation? Rack mounting hardware is composed of front and rear mounting brackets with lock nuts, screws and shelf rails. 1. Verify that there is 5RU space in your rack. 2. Select the two front mounting brackets that match your rack. 3. Attach the front bracket to the rack. 4. If your rack has round holes,…

How is the emergency light energized?

How is the emergency light energized? Most of the emergency lights installed in the enterprise are simple lighting devices, including a small battery. The device is connected to the power supply of the building to provide constant charging for the battery. In case of failure, the emergency lamp design only applies to the code required for battery power supply for…

How does the UPS charge its battery?

How does the UPS charge its battery? Its internal components are not sealed with the environment. Please install it to protect the environment from overheating or excessive humidity. For indoor use only. The battery is fully charged at the factory. However, it is recommended to charge the battery for at least 8 (eight) hours before using the UPS, as energy…

How do you use UPS?

How do you use UPS? You just need to plug the power cord of the PC and screen into the UPS, then plug in the UPS, turn it on, turn on your computer, and you can start using Purchase an uninterruptible power supply. Unpacking the UPS Follow its instructions. Even if the telephone line MODEM is not used, use the…