Bake the polar slices Lithium battery electrode baking is an...
OCV measurement
In the lithium battery production process, OCV (Open Circuit Voltage) measurement is a key quality control step. The following is a detailed description of the OCV measurement:
Definition and importance of OCV measurement
OCV refers to the potential difference between the positive and negative electrodes of the battery under no load conditions, that is, the voltage value when the battery reaches chemical equilibrium after standing for a period of time. OCV measurement is critical for evaluating battery performance, monitoring battery status, and battery management systems (BMS) because it is directly related to the State of Charge (SOC) and State of health (SOH) of the battery.
Timing of OCV measurement
OCV measurement is usually carried out at each step after the cell is first charged, especially in the aging test, where the OCV is regularly measured and the amount of change is checked. Because the amount of change in OCV value caused by self-discharge is small, it takes at least 100 to 400 hours for the aging test to detect defects.
Method of OCV measurement
Ensure no current flow: Before measuring OCV, ensure that the battery is not connected to any load and that the charging and discharging process has stopped.
Wait for voltage stability: After the battery transitions from the charge and discharge state to the open state, wait for a period of time to ensure voltage stability.
Use high-precision measuring equipment: Use high-precision voltage measuring equipment, such as a digital multimeter or a dedicated battery tester.
Temperature compensation: Since the temperature has an effect on the OCV, the measurement results need to be temperature compensated.
Periodic calibration: Regular calibration of measuring equipment and BMS to ensure long-term measurement accuracy.
Key parameters of OCV measurement
Temperature: Temperature is one of the important factors affecting the OCV of lithium battery cells. At different temperatures, the chemical reaction rate will change, which will affect the OCV value.
SOC Range: Due to the nonlinear relationship between OCV and SOC, OCV testing at different SOC values is required to determine an accurate OCV-SOC curve.
Open circuit time: Different lithium battery cells differ in the resting time. Through OCV testing of different cells and analyzing the relationship between the open time and OCV, the influence of open time on the stability of OCV can be obtained.
The significance of OCV measurement
Through OCV measurement, you can initially assess the health of the battery, the state of charge and discharge, and the remaining capacity of the battery. This is essential for battery use and maintenance. In addition, the monitoring of the OCV is essential for the overcharge and overdischarge protection of the battery, and the BMS can use the OCV threshold to prevent the battery from being overcharged or underdischarged.
CONCLUSION
In summary, OCV measurement is an important link in the production and inspection of lithium batteries, which provides key data for battery performance evaluation, condition monitoring and safety management.
EPS BATTERY SERIES
The centralized power supply for fire emergency lighting is a kind of backup power supply equipment, which provides power guarantee for emergency lighting equipment to ensure that the on-site lighting equipment can operate normally in emergency situations such as fire. Provide a long-term backup power supply to meet the needs of the emergency lighting system.
Extended reading
Negative homogenate
Negative homogenate Lithium batteries, especially lithium-ion batteries, are widely used...
THE ESSC Brand promise
Global supply
Our products sell well all over the world, covering many countries and regions, through the global logistics network, to provide customers with convenient purchasing experience.
Rigorous quality
We adhere to the highest quality control standards to ensure every product meets industry regulations and customer expectations, earning trust through consistent excellence.
Excellent service
With a customer-centric approach, we provide prompt responses, professional support, and personalized services, aiming to deliver the best user experience and long-term value.