• +86-18922133492
  • info@esscollege.com
  • China

How to check solar street lamps?

Test integrated solar street lamp

Cover the solar panel and check whether the light is on.

If the lamp does not work, check whether the wire is connected correctly.

If the light is on, charge it in direct sunlight for 2 to 3 hours.

Close the panel again and check that the light is on.

When the light is on, remove the panel and place it in the sun. If the controller works normally, the lamp must be turned off. If so, please continue the process of covering and uncovering for more than 2 to 3 times to ensure that the lamp works normally.

Test the all-in-one solar lamp

Press the ON/OFF button

Cover the solar panel and check whether the solar lamp is on when you cover it

If you don’t start the machine, check the wiring, and then check it again after 2 to 4 hours of charging

If the light comes on when the battery panel is covered, remove the panel and place it in the sun

If the controller works as expected, the light can be turned off

After two or three tests, determine whether the lamp is intact and can be used for installation

Sourcing Guide Download

Make a Enquiry Today!

    FAQ