This section describes the main control unit in the display...
Dc charging pile power management chip battery protection circuit
The battery protection circuit of DC charging pile power management chip is the key technology to ensure battery safety and extend battery life.
Main component
Concept:
The battery protection circuit of the DC charging pile power management chip refers to a series of protection functions integrated in the power management chip, which are designed to ensure the safety and stability of electric vehicle batteries during the charging process. The battery protection circuit can monitor and manage the charging state of the battery to prevent abnormal conditions such as overcharge, overdischarge, overheating, overcurrent and short circuit, so as to protect the battery from damage, extend the battery life, and ensure the safety of the charging process.
Function:
1. Overcharge protection: prevents the battery voltage from exceeding the safety threshold to prevent battery expansion or damage.
2. Overdischarge protection: Avoid battery performance degradation or damage due to low battery voltage.
3. Overcurrent protection: Limit excessive current flowing through the battery to prevent overheating or damage to the battery.
4. Overheat protection: Monitor the battery temperature to prevent battery performance degradation or thermal runaway due to overheating.
5. Short circuit protection: Quickly cut off the power supply when the battery or charging line is short circuited to prevent damage and fire risk.
6. Balanced charging: For multi-battery systems, the balanced charging function can ensure that the voltage of each battery is consistent, and avoid overcharging or over-discharging of individual batteries.
Working Principle:
1. Voltage monitoring: real-time monitoring of the battery voltage through the voltage sensor, once the voltage is detected to exceed the preset safety range, take immediate measures, such as reducing the charging current or cutting off the power supply.
2. Current monitoring: Monitor the current flowing through the battery. If the current exceeds the set maximum value, start the overcurrent protection mechanism.
3. Temperature monitoring: Use the temperature sensor to monitor the battery temperature, if the temperature is too high, reduce the charging current or stop charging to prevent overheating.
4. Communication protocol: It communicates with the battery management system (BMS) of the electric vehicle and dynamically adjusts the charging parameters according to the information provided by the BMS.
5. Control algorithm: The built-in control algorithm intelligently regulates the charging process according to the monitored voltage, current and temperature data to ensure safe and efficient charging.
6. Hardware protection: In addition to software control, the power management chip may also integrate hardware protection mechanisms, such as fuses or circuit breakers, to provide additional security.
Sum up
Through the design and working principle of the above battery protection circuit, the DC charging pile power management chip can provide a safe and reliable charging solution for electric vehicles, protect the battery from damage, and improve the user's charging experience.
DC CHARGING PIlE SERIES
DC charging pile is an efficient charging facility for electric vehicles, which uses direct current (DC) to directly charge the vehicle battery, significantly reducing the charging time. Compared with traditional AC charging piles, DC charging piles are able to provide higher power output and can usually charge an EV to 80% of its capacity in 30 minutes, providing users with a convenient charging experience.
Extended reading
Introduction to magnetic bead of DC charging pile filter
Introduction to magnetic bead of DC charging pile filter The...
Mobile Communication Module of DC charging pile charging control unit
Mobile Communication Module of DC charging pile charging control unit...
Introduction of interface circuit in card reader
Introduction of interface circuit in card reader Main component Card...
Dc charging pile communication charging module External module
Dc charging pile communication charging module External module Main component...
THE ESSC Brand promise
Global supply
Our products sell well all over the world, covering many countries and regions, through the global logistics network, to provide customers with convenient purchasing experience.
Rigorous quality
We adhere to the highest quality control standards to ensure every product meets industry regulations and customer expectations, earning trust through consistent excellence.
Excellent service
With a customer-centric approach, we provide prompt responses, professional support, and personalized services, aiming to deliver the best user experience and long-term value.