Maintain the battery module after the capacity divider test Follow-up maintenance of the battery module after the capacity division test includes the following aspects: Battery pack connection point check Check the connection points of the battery pack to ensure tight contact and no oxidation, and apply petroleum jelly to prevent further oxidation. Appearance inspection Check the appearance of the battery…

What are the pre-processing steps for the battery module before and after the capacitance test? The pre-treatment of battery modules before and after capacitance testing is a key step to ensure battery performance and safety. Here’s a breakdown of these steps: main content Charge to preset State of Charge (SOC) Before the capacitance detection, the treated single battery needs to…

Production process 12- Capacity test In the UPS (uninterruptible power supply) production process, the capacitance test is a key step in forming the battery module to ensure that the performance of the battery module meets the standard requirements of the UPS. The following is the main process and key points of the volume detection： main content The basic principle Based…

Production process 11- forming In the UPS (uninterruptible power supply) production process, molding refers to the battery unit after formation through a series of process steps, and finally become the UPS battery module process. The following are the main steps and key points of the forming process: main content Battery cell cleaning After the formation process, the surface of the…

Production process 10- Formation In the UPS (uninterruptible power supply) production process, formation is an important step after the battery is injected into the electrolyte, the purpose is to activate the chemical substances inside the battery, forming a stable structure, including the following key links: main content Definition of formation Formation is the process of forming a stable chemical reaction…

Production process 9- liquid injection In the UPS (uninterruptible power supply) production process, liquid injection is a key step after the battery unit is baked to complete the battery activation process. The following are the main steps and key points of the liquid injection process: main content Preparation before injection Before injection, the baked battery cell needs to be tested…

Production process 8- baking In the UPS (uninterruptible power supply) production process, baking is an important step after the battery unit packaging, the main purpose is to remove the water inside the battery, prevent battery short circuit and improve the safety of the battery. The following are the main steps and process requirements of the baking process: main content Preparation…

Production process 7- Packaging In the UPS (uninterruptible power supply) production process, the packaging process is the key step of placing the wound battery unit into a vacuum environment, injecting electrolyte, and packaging to form the final battery unit. Here’s a breakdown of the process: main content Preparation before injection Before injection, the soft pack cell is X-rayed to ensure…

Production process 6-winding In the production process of an Uninterruptible Power Supply (UPS) system, the manufacturing of the battery pack is one of the key steps, and the winding process is an important step in forming the core components of the battery (such as lead-acid batteries or lithium batteries). This article will introduce the winding process in UPS production process…

Production process 5- Welding electrode lugs Uninterruptible Power Supply (UPS) plays a vital role in modern power systems, ensuring the normal operation of equipment in the event of a power interruption. In the production process of UPS, the welding pole is a key link, which directly affects the performance, safety and reliability of the equipment. This article will introduce the…