The electrode of EPS battery cell collects fluid The electrode...
EPS inverter protection circuit analysis - temperature sensor
Emergency power system (EPS) inverters play a vital role in power conversion and power management, but because of the variability of their working environment and load conditions, the design of protection circuits is particularly important. The effective protection circuit can ensure the safe and stable operation of the inverter and extend the service life of the equipment. This paper will discuss the protection circuit in EPS inverter, focusing on the temperature sensor.
Temperature sensor
Temperature sensors also play an important role in the protection circuit of EPS inverters. They are used to monitor the temperature inside the inverter to prevent equipment damage due to overheating. Temperature sensors can be negative temperature coefficient (NTC) thermistors whose resistance decreases as the temperature increases, triggering a protective circuit.
Temperature monitoring and protection measures
Temperature sensors: Common temperature sensors are thermocouples and thermistors (NTC/PTC). These sensors are used to monitor temperature changes inside and outside the inverter in real time.
Temperature threshold setting: A certain temperature threshold can be set. When the temperature exceeds the preset value, the component begins to enter the protection state.
Control system response: In the event that the temperature is detected to be too high, the MCU or DSP can take measures such as reducing the output power of the inverter, enabling the fan for heat dissipation, or directly cutting off the power supply to prevent overheating damage.
CONCLUSION
In the overtemperature protection circuit, the temperature sensor (such as NTC thermistor) and the operation amplifier constitute a comparison circuit, when the temperature exceeds the set threshold, the output signal of the operation amplifier will change, triggering the protection mechanism. This design can effectively prevent the inverter from working in a high temperature environment and protect the safety of the equipment.
EPS BATTERY SERIES
The centralized power supply for fire emergency lighting is a kind of backup power supply equipment, which provides power guarantee for emergency lighting equipment to ensure that the on-site lighting equipment can operate normally in emergency situations such as fire. Provide a long-term backup power supply to meet the needs of the emergency lighting system.
Extended reading
EPS shell material – flame retardant material
EPS shell material – flame retardant material EPS battery cell...
EPS inverter DC input part analysis: DC-DC converter
EPS inverter DC input part analysis: DC-DC converter The DC-DC...
Introduction of cooling pump in EPS cooling system 1
Introduction of cooling pump in EPS cooling system 1 In...
EPS shell material – plastic material
EPS shell material – plastic material The housing material of...
THE ESSC Brand promise
Global supply
Our products sell well all over the world, covering many countries and regions, through the global logistics network, to provide customers with convenient purchasing experience.
Rigorous quality
We adhere to the highest quality control standards to ensure every product meets industry regulations and customer expectations, earning trust through consistent excellence.
Excellent service
With a customer-centric approach, we provide prompt responses, professional support, and personalized services, aiming to deliver the best user experience and long-term value.